high-power Crane conductor rail Current collector

Detailed Product Description

 

Outline of Current Collector

Current collector supply electric power to moving electric railcar, overhead traveler, tower crane, automatic conveyer line.    It should be possible to collect the current when the train is driven at high speed as well as when stopped, and the work of current collector should not be affected by the wind speed and noise while driving at high speed.

Especially while driving, required to be low. This can be classified as one for high-speed railway and one for light subway according to the characteristics and speed of the train.  

 

Crrent collectors  have very excellent lubricity and electrical conductivity, Also It does not harm other electrifying rail and have good wear resistance and strength.

 

Double Current collectors for transfer applications and higher amperage.

 

Electrical technical parameters

Max.current(A):  250 - 500 - 800 -1000

 

 

Combustibility:

Flame retardant

Self extinguishing:class B 1-no flaming paricles,self-extinguishing.

 

Standard application data

Operating Conditions: for indoor and weather protected outdoor applications

 

Special features

High availability in strong industrial enviroment trough several material

High level of safety trough insulation profiles with integrated finger safe protection

Easy and exact mountig with multiple hangr clamps for (3, 4 and 5 pol)

Free and unlimited combination for multiple amount of rails

On side bending with optional bending device for curves possible

 

Main applications

EOT cranes

People Mover

Special purpose equipment

 

Maintenance

--After installation,Make sure that the sliding hangers are straight (in a perpendicular position) after nuts have been tightened to guarantee free sliding of the powerail.The powerail must be installed exactly straight and parallel to the machinery track.

--Before running the powerail,Check the system for esay running of the current collector trolleys,i.e.there may be no resistance by an excessively narrow slot or pull by the connecting cable.

--Every 3 up to max.12 months,-depending on the frequency of operation and travel distance-,check the carbon brushes and mechanical componets for wear and replace them if necessary